Connect with us

Events

This year’s motto: STUDER Fight Club

Published

on

Just over a year ago, STUDER had to cope with a decline in Sales, however still recorded the third-best year since its founding. However, the economic situation was already deteriorating significantly at that time. With the outbreak of the COVID-19 pandemic, many Countries imposed lockdowns in February and March, some of them severe. STUDER ended 2020 on a positive note thanks to an excellent order input at the beginning of the year and above all, due to a strong year-end spurt. The positive mood of customers has accompanied STUDER into 2021. A further economic recovery is noticeable.

Due to the worldwide travel restrictions and protective measures, and in the spirit of digitalization, this year’s STUDER press conference took place online. It is very encouraging that a record number of participants took part this year. To cater for the individual time zones, three events were held on the same day. Around 120 participants from more than 30 different countries participated in the event.

Traditionally, the STUDER press conference takes place as part of the Motion Meeting, the annual worldwide sales event. And this year, too, the events held online were united by the common motto: “STUDER Fight Club”. STUDER reported live from the boxing and training studio set up especially for these conferences.

The last Motion Meeting took place over a year ago. Although STUDER had experienced a decline in sales at that time, the company still recorded the third-best year since its founding. However, the economic situation had already deteriorated sharply. “We are accustomed to this, because machine manufacturing is notoriously a very cyclical business and you need to be able to manage these fluctuations in order to survive”, says Jens Bleher, CEO of Fritz Studer AG. However, a new threat was appearing on the horizon for the world economy: The corona pandemic. “Initially it was a matter of protecting the staff and safeguarding the company”, continues Bleher. STUDER reacted quickly, and consistently introduced extensive protective measures. The STUDER Corona Task Force went into action from the outset. This meant that outbreaks in the factory could be prevented and STUDER was able to always provide a full service for its customers. The company is doing everything in its power to ensure that this remains the case.

STUDER has successfully withstood corona and the downturn, and overall, the situation is considerably better than during the financial crisis ten years ago. The company has reacted to drops in sales with the proven annual work-hour model and where necessary, with short-time working. Major developments have been continued and the product portfolio further developed. Numerous group projects from “UNITED GRINDING Digital SolutionsTM” play a key role in connection with digitalization. Structural alterations and investments in new products, machinery and equipment have also been considered. “STUDER invested in 2020 and will continue to do so this year.” says Jens Bleher. “All in all, we consider ourselves to be well positioned, which is a decisive advantage, particularly in the current competitive environment”, continues Bleher.

Apprentices at STUDER

They were also affected by the pandemic, but even in these times STUDER has stuck to its tried and tested vocational training. “The number of STUDER apprentices remains high, they make up over 11% of the workforce”, explains Jens Bleher. STUDER was also able to always ensure professional training. This is reflected by the success of the apprentices in their final year, who were able to prepare thoroughly, and all passed their final exams. In addition, an internal follow-on solution could be offered for all. STUDER is continuing to invest in apprenticeship training, such as a new NC lathe for the apprentice workshop.

In addition, STUDER vocational training once again produced top-level performances last year. All four STUDER participants won medals at the SwissSkills in the disciplines of polymechanics and automation. With one gold, one silver and two bronze, they achieved the best results in years. “STUDER thus has the current Swiss champion in polymechanics and will be represented again at the next WorldSkillls,” Jens Bleher concludes.

Sales, Service and Marketing Activities

The STUDER start to the year 2020 was promising, until the point in March when one country after another around the world implemented drastic and strict lockdown measures. “But even in a year like this, it is important to hold on to the positive,” says Sandro Bottazzo, CSO of Fritz Studer AG.

STUDER was able to start the past year with a good backlog thanks to the positive order intake from the previous year. “Thanks to the very good order intake towards the end of last year, particularly from Asia and Latin Europe, but also in some cases from Central Europe, STUDER generated a substantially higher order volume than during the last major crisis in 2009. This was a positive development because the general market decline was similar to that experienced during the financial crisis more than eleven years ago,” says Bottazzo. The strong December also put the company in a positive mood. “Many of our customers are expecting a stronger second quarter or second half of 2021 in particular, which is precisely why many grinding machines were still ordered in December,” concludes Sandro Bottazzo, summing up the past year.

“Another key factor of STUDER’s success is the broad portfolio of different universal external, internal, production and conventional cylindrical grinding machines”, continues Bottazzo. The new S33 launched in 2019 was by far the best-selling STUDER cylindrical grinding machine last year. Followed by the internal grinding machines as well as the new S31 and the new favorit. Sales of the entry-level external grinding machine, the favoritCNC, have also developed very positively.

Summing up the market in general, the order situation in Germany in particular, was low compared with previous years. This is partly due to the COVID 19 pandemic, but also to the ongoing structural changes in the automotive industry. Order intake in 2020 from Asia, North America and North-eastern Europe remained at a very pleasing level. This was mainly due to high demand from the job-shop and aerospace industry segments. However, Latin Europe was also quite positive, thanks to the strong end-of-year spurt from Italy. “In total, we sold our grinding machines in over 40 different countries worldwide in 2020,” Bottazzo explains.

Another key success factor over the past year was STUDER Customer Care. “Thanks to our local, customer-focused network of over 130 STUDER service technicians worldwide, we were able to provide our customers with continuous support during the pandemic”, says Bottazzo – despite international restrictions. This global network of service technicians is certainly unique in this form in the universal cylindrical grinding machine market. A network which STUDER will continue to expand. “We are convinced that sustained success is only possible, if we are and remain close to our customers”, emphasizes Sandro Bottazzo.

STUDER has also further developed its portfolio of digital services. Customers can now purchase the complete UNITED GRINDING Digital SolutionsTM retrofit package with a maintenance contract at a special price. With a very wide portfolio of services, STUDER offers everything from one source throughout the entire life cycle of a cylindrical grinding machine.

Insights into STUDER Production

The UNITED GRINDING Group has developed a digitalization roadmap, which STUDER is now implementing step by step. “In addition, we also use all the technologies that we offer to our customers in our own production”, explains Stephan Stoll, COO of Fritz Studer AG.

UNITED GRINDING Digital SolutionsTM can be mentioned as an example. The Production Monitor provides an overview of the operating status of the company’s manufacturing and assembly production equipment at any time. It shows customers in real time whether and which machines are in operation and can display the corresponding production history. This is not only of particular interest and benefit for managers on the shop floor, but also for machine operators of unmanned machines. Not only can STUDER machines and other machines from the UNITED GRINDING Group be integrated into this app, but, via the standardized umati interface, a wide variety of external production equipment and manufacturers can also be integrated. “At the workstation, the system also allows many detailed analyses and status reports, including information on order statuses, maintenance intervals, and any servicing that may be required,” says Stoll.

Digital tools are another step towards digitalization: Work instructions, test processes and checklists are largely paperless and are always available in the latest version. “Tablets and screens have already become indispensable aids for the STUDER assembly specialists and are used in a suitable form depending on the workstation”, Stephan Stoll concludes.

At the Heart of STUDER – Technology Development

At the STUDER Tech Center, innovations are created, and customer-specific requirements are put through their paces.

Digitalization is also a key issue in technology development. “Today and in the future, we need a transparent yet secure connection, so that process information can be easily transferred to external systems”, says Daniel Huber, CTO of Fritz Studer AG. These are precisely the advantages offered by the STUDER OPC-UA solution. In the Tech Center all machines are also connected by means of OPC-UA to our UNITED GRINDING Digital SolutionsTM applications according to the umati universal machine tool interface standard and equipped with additional sensors.

A technology innovation is the laser measuring technology with STUDER LaserControlTM. STUDER has many years of experience in basic research on the use of machine-integrated laser measuring technology for measuring grinding wheels or workpieces. Based on these findings and the latest laser measuring technology, STUDER has further developed the tool monitoring systems used in other industries, to measure workpieces on grinding machines. The latest generation of the STUDER laser measuring system LaserControlTM is suitable, not only for the contact-free measurement of tool cutting edges in the toughest conditions, but also for rotating workpieces, which considerably reduces measuring time. Unbeatably fast, precise, and reliable thanks to premium laser optics and the latest evaluation technology. Highly dynamic and contact-free measurements also allow quality assessment of high-precision PCD tools.

Outlook for EMO Milan

Although STUDER gives an insight into the company’s technology, one future-oriented area remains under wraps. The company is working on THE innovation for EMO 2021. STUDER and the whole UNITED GRINDING Group look forward to surprising you with several innovations at EMO in Milan! Visit us on our exhibition stand at EMO Milan from 4 – 9 October 2021!

Continue Reading
Click to comment

Leave a Reply

Your email address will not be published.

Events

Kennametal Introduces HiPACS for Aerospace Fastener Hole Drilling and Countersinking in One Step

Published

on

By

Kennametal has introduced the HiPACS drilling and countersinking system for aerospace fastener holes. Designed to drill and chamfer holes in one operation, the high-precision tool meets the aerospace industry’s stringent accuracy requirements, while delivering increased tool life in machining composite, titanium and aluminum aircraft skins.

“Most fastener hole tools used today are complex made-to-order tools with long lead-times,” says Georg Roth, Product Manager, Kennametal. “HiPACS uses standard, off-the-shelf components for quick delivery and low cost per hole, by allowing the drill and chamfer insert to be indexed independently from one another. What’s more, it’s the only indexable drilling and countersinking system on the market that can hold the aerospace industry’s required fastener hole chamfer tolerances in just one operation.”

Three simple components eliminate the need for custom tooling
Designed to be clamped in a standard hydraulic chuck, the HiPACS modular system consists of three components that are fast and easy to assemble:

-A reducer sleeve with a built-in high-precision pocket seat. In conjunction with a standard hydraulic chuck, this component provides ultra-secure clamping and a runout of no more than 3µm, significantly increasing tool life and hole quality.
-A PCD countersinking insert. This eliminates the need for expensive custom solution step drills, reducing manufacturing costs while meeting the industry’s accuracy requirements.
-The two series of solid carbide drills —both diamond-coated and PCD-tipped—covering all material combinations found in a typical aerospace assembly. In addition, the straight shanked tools allow for length adjustments in increments of 10mm.

The new HiPACS drilling and countersinking system can be utilized on all machines typically used for aerospace applications. In less stable conditions such as robot end effectors, the diamond coated carbide drills offer excellent tool life and hole quality. PCD-tipped drills, on the other hand, excel in stable conditions such as gantry machines.

With an industry standard interface, HiPACS can be utilized on any CNC machine, and is suitable for a variety of drilling and countersinking applications.

Continue Reading

Events

Gleason Sets Stage for Future Virtual Shows, with very successful ‘emotions’

Published

on

By

Gleason’s first-ever virtual show, called ‘emotions’, drew visitors from 39 countries representing manufacturers from all the major gear industries. The recent 12-day global event will serve as the launch pad for subsequent Gleason virtual events, making it easier for visitors around the world to engage on the most important gear technologies and developments.    

May 17, 2021, Rochester, NY

Gleason Corporation has completed its first-ever virtual event, called ‘emotions’ running from May 4th to May 15th including an extension of the event due to great demand. ‘emotions’ showcased the latest gear technology innovations for cylindrical and bevel gear design, manufacture and inspection. Visitors from around the world accessed four showrooms with different themes, ranging from e-drives to industrial gears, Closed Loop manufacturing, in-process inspection and detailed gear noise analysis.

Each showroom was accompanied by a special event presentation by an industry expert. After each opening event participants could browse through the respective showrooms to experience the featured technologies, with or without a guided tour. Gleason’s technology experts and product managers were available through the duration of the virtual event to answer questions and provide additional information. 

“We thank the many customers that joined us for this special event,” says Christian Albrecht, Director Corporate Marketing at Gleason Corporation. “While we were unsure about what we could expect from a digital show, we are extremely pleased with the positive feedback from our global customer base. We are already in the planning stage for adding additional capabilities and new content for future events. For those that were not able to participate some of the content is available on our website or can be obtained by requesting through our global sales network.”

Continue Reading

Events

EUROTRANS Gear Training Weeks

Published

on

As a federation, the EUROTRANS support the interests and represent the European power transmission industry with more than 160.000 people and 600 companies active in our industry. The European gear and drive industry is a leading actor on the worldwide level. As an organization we keep working on reinforcing this leadership with a dynamic research and technological environment. In this vision the EUROTRANS propose a wide range of trainings and seminar with top level experts and academicians from various universities and organization. 

This year again and despite a complicate global context, we are happy to announce a new training program for 2021. The gear weeks will be held online with the participation of top industry experts and a wide range of subjects. Organized in collaboration with the FVA Software and service, the training will be held online from the 18th May to 10th June. 

Week 1 – Trainer: Dr. Christian Wirth, MAHLE ZG Transmissions GmbH

18.05.2021: Geometry Fundamentals of Involute Gears
19.05.2021: Fundamentals of Bevel and Hypoid Gears
20.05.2021: Basics of Planetary Gears
 

Week 2 – Trainer: Dr. Ferdinand Wikidal, GearConsult

25.05.2021: Load Capacity Rating Based on Standards
26.05.2021: Gear Design Based on Local Methods
27.05.2021: Application of Gear Rating Methods
 

Week 3 – Trainer: Dr. Klaus Michaelis, Institute of Machine Elements of the Technical University of Munich, “Gear Research Center” (FZG)

08.10.2021: Optimal Use of Gear Materials
09.10.2021: Basic Rating Practice for Safely Avoiding Gear Failures
10.10.2021: Practice-oriented tests for gear lubricants

All modules are scheduled from 03:00 PM – 04:30 PM CET

Continue Reading

Trending

Copyright © 2011-2018 Moneta Tanıtım Organizasyon Reklamcılık Yayıncılık Tic. Ltd. Şti. - Canan Business Küçükbakkalköy Mah. Kocasinan Cad. Selvili Sokak No:4 Kat:12 Daire:78 Ataşehir İstanbul - T:0090 212 252 71 85 - info@monetatanitim.com